Groomers Helper® Starter Special – A Starter Set with 1″ Arm and 1″ Clamp

Used by over 100,000 Groomers worldwide including every table at the largest major pet chains and thousands of Independent operations in all hemispheres!

Stop Struggling and groom hands-free!  Stop the biters!  No more head-droppers and no more spinners!  One person can do most nail clips and you will wonder how you ever groomed without it.  Significantly reduces injuries to both pets and groomers alike!

When you are in control, you can groom more dogs, safer and more efficiently and add MUCH more to your bottom line!  Used as instructed, it can pay for itself the very first week.

Starter Set includes: (1) Groomers Helper® Classic Clamp, (1) Groomers Helper® 5/8″ Grooming Loop, and (1) Training Card directing users towards our comprehensive training videos.

This is simply the best quality, strongest grooming arm in the industry.  It is 100% Guaranteed never to bend, with a 100% replacement policy.  If it ever bends as a result of normal use, it will be replaced for free.

​Fabricated of high quality, 16 gauge stainless steel and manufactured in the USA by Groomers Helper®.

This arm will outlast all of your other grooming equipment.

GROOMING ARM SIZE: 17″W x 48″H x 1″ Thick

This “Flip-Top” grooming arm is designed to “flip” out of the way so you can groom the way you want. It has a pin locking system that holds the top of the arm securely in place, whether it is opened or closed.

This is simply the best quality, strongest “Flip-Top” grooming arm in the industry. 

• It is 100% Guaranteed never to bend, with a 100% replacement policy.
• If it ever bends as a result of normal use, it will be replaced for free.
• ​Fabricated of high quality, stainless steel and manufactured in the USA by Groomers Helper®.
• This arm will outlast all of your other grooming equipment.

SIZE
Opened: 17″W x 48″H x 1″ Thick
Closed: 48″H x 1.125″ Thick

*The main part of this arm is 1″ square and requires a clamp that can accommodate that width in order to work properly.

This clamp opens to a maximum of 1 3/4″.

This grooming clamp features a heavy-duty welded steel construction for years of use. There is a spring steel tension clip at the bottom to prevent the grooming arm from sliding down while adjusting the height; and a silicon pad on top to help keep the clamp from damaging the grooming table top. Additionally, our clamps feature a stainless steel core to prevent rusting to the grooming arm; and (2) Reinforcing Bolts for the plates to magnify its robust durability.

FEATURES:

• Rubber Top Cover to protect the table and clamp.
• Swivel cup washers to protect the underside of the tabletop when tightened.
• Hardened steel main bolts for extra durability & stability.
• Stainless Steel Core prevents rusting to the arm.
• Locking Nuts prevents clamp from loosening once set in place.
• Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
• Extra Strong ¼” Powder coated plate steel construction.
• Reinforcing Bolts for the plates to increase its robust durability.
• Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

This clamp will open to a maximum of 3 1/2″.

FEATURES:

• Rubber Top Cover to protect the table and clamp.
• Swivel cup washers to protect the underside of the tabletop when tightened.
• Hardened steel main bolts for extra durability & stability.
• Stainless Steel Core prevents rusting to the arm.
• Locking Nuts prevents clamp from loosening once set in place.
• Spring Steel Safety Clip prevents grooming arm from falling on groomers or dogs.
• Extra Strong ¼” Powder coated plate steel construction.
• Reinforcing Bolts for the plates to increase its robust durability.
• Conversion kit to ¾” arms available.

The is the ONLY clamp in the industry with these bolt locking and safety features.

NON-STANDARD TABLE DEFINED:
A Non-standard table has a table top that is over 1 3/4″ thick – it may be home made, or a lighted grooming table, or a table that has a metal frame holding the top on. This clamp is designed for use with a non-standard grooming table ONLY and should not be used on a standard table top.

NOTES: 

Do not purchase a Universal Clamp(s) if a Standard Clamp will work. The weakest parts of any clamp are the screw in bolts that hold it to the tabletop.  Therefore if you are using a Universal Clamp with a 1″ thick table you will have over 2″ of the screw out of the clamp and pressing into the table. This will allow any stress from the arm to be loaded on to the screws and increase the likelihood of them bending. You should purchase the 1″ Standard Clamp unless necessary.

If you have purchased this Universal Clamp in order to get past the table frame, but the table top itself is only 1″ thick, we recommend adding additional support.

One solution that is common is to cut a 2ʺ x 4ʺ (1.5” thick) the size of the clamp (6”) and place it between the table bottom and the cup washers on the top of the screws of the clamp. This will shorten the distance the screws go in and make it much harder for them to bend. Use a few drops of wood glue and this will keep the block in place.